• +977-1-5705083, 5705035

  • info@barcodenepal.com

Yeastar P560

Share the Website to

Front panel

Yeastar P560 supports 1 expansion board. You can install either EX08 board or EX30 board according to your needs.

FigureYeastar P560 front panel with an EX08 expansion board 
FigureYeastar P560 front panel with an EX30 expansion board 
No. Interface or Expansion Board Description
NFC tag Tap NFC-capable mobile phone's back against Yeastar logo to quickly configure network settings.
EX08 Expansion Board

Up to 4 modules and 8 RJ11 ports are supported on the expansion board.

The 8 RJ11 ports can be used to connect to different objects:

  • FXS port (green light): For the connection of analog phones or fax machines.
  • BRI port (orange light): For the connection of BRI lines.
  • FXO port(red light): For the connection of PSTN lines or FXS ports of traditional PBX.
EX30 Expansion Board Used to connect an E1/T1/J1 line.

Rear panel

No. Indicator, Button, or Interface Description
Reset button Press the button to restore to factory defaults.
System Indicator Indicate the system status.
  • Blinking: The system is working properly.
  • Static/Off: The system goes wrong.
Power Indicator Indicate the power status.
SD Slot Insert an SD card to store recording files, voicemails, or logs.
USB Slot Insert a USB flash drive to storage recording files, voicemails, or logs.
WAN Port

For connection to Wide Area Network (WAN).

LAN Port For connection to Local Area Network (LAN).
Console Connect RS232 line to debug the system.
Power Switch Press this button to switch on/off the device.
Power Inlet Connect the supplied power supply to the port.
Protective Earth Connect to the ground to reduce the risk of electrocution to the user or protect the PBX from bad effects of external noise in case of a lightning strike.
Antenna Socket Rotate the antenna into the Antenna Socket.