① |
NFC Tag |
Tap NFC-capable mobile phone's back against Yeastar logo to quickly configure network settings. |
② |
System Indicator |
Indicate the system status.
- Blinking: The system is working properly.
- Static/Off: The system goes wrong.
|
③ |
Power Indicator |
Indicate the power status. |
④ |
WAN Port |
For connection to Wide Area Network (WAN).
|
⑤ |
LAN Port |
For connection to Local Area Network (LAN). |
⑥ |
USB Slot |
Insert a USB flash drive to store voicemails, logs, or recording files. |
⑦ |
1-8 LED (RJ11 port status) |
Indicate the ports' status.
- FXS:
- Green: static: The analog phone or fax machine is idle.
- Green: blinking: The analog phone or fax machine is busy.
- GSM/3G/4G LTE:
- Red: static: The GSM/3G/4G LTE trunk is idle.
- Red: blinking slowly: No SIM card.
- Red: blinking rapidly: The GSM/3G/4G LTE trunk is in use.
- BRI:
- Orange: static: The BRI line is connected or in use.
- Orange: blinking: The BRI line is disconnected.
- FXO:
- Red: static: The PSTN line is idle.
- Red: blinking slowly: No PSTN line is connected to the FXO port.
- Red: blinking rapidly: The PSTN line is busy.
|
⑧ |
1-8 port (RJ11 ports) |
- FXS port (green light): For the connection of analog phones or fax machines.
- BRI port (orange light): For the connection of ISDN BRI lines.
- FXO port (red light): For the connection of PSTN lines or FXS ports of traditional PBX.
|
⑨ |
Reset button |
Press the button to restore to factory defaults. |